| >>Pet
Fencer |
|
|
Questions |
|
Answers |
| |
|
|
| Will
my fence work in snow or cold weather ? |
|
Adjust
the minimum/maximum range depending upon the amount
of snow you have received. For example, if the
pet normally receives a correction within 6"
of the fence, but 11" of snow has fallen.
You will have to readjust the range to compensate
for the snow.
|
| |
|
|
| When
can I take the boundary flags down ? |
|
You
can remove the flags when your training is complete
or when you feel your pet has a good grasp of where
the electronic boundary is. |
| |
|
|
| Will
my fence still work if I add an additional collar
for my other pet to use ? |
|
You
can add any amount of additional collars to the
boundary fence system and it will work just as efficiently.
Additional collars do not effect system performance
or strength. |
| |
|
|
| How
much wire can be used with the system ? |
|
Approximately
2,3 km |
| |
|
|
| Can
I install the boudary wire through a driveway ? |
|
Yes.
You must thread the wire loosely through plastic
tubing. |
| |
|
|
| What
happens if the wire is broken? |
|
If
the circuit is opened, a buzzer will sound, and
a red indicator light will flash while the green
light will be gone off. |
| |
|
|
| How
do I create a free zone ? (path) |
|
You
need to twist the wire. |
| |
|
|
How
to test the collar?
|
|
Move
the collar towards the fence wire in the same orientation
as it would be if it was on your pet, i.e. with
the two probes pointing upwards. The collar will
not work correctly if it is not in the correct orientation.
|
